Author: hanrryjones

Having trouble configuring your Netgear extender setup? You’re not by yourself! Common problems that many customers encounter include low signal quality, dropped connections, and difficulty navigating to the extender’s settings page. With a little basic troubleshooting, many issues are typically simple to resolve. Weak signals are caused by the extender being too far away from the router, which is one of the most common problems. Make sure your WiFi extender is at a decent range in order to maximize its power. An unsuccessful connection might also be caused by misconfigured network settings made during the Netgear extender setup process. Verify…

Simply insert the Wavlink AC1200 extender into the socket to start the Wavlink AC1200 setup process. Once that is done, watch the power LED blinking for a few minutes. After that, press the Wavlink AC1200 extender’s WPS button, then after two minutes, press the WPS button on the current router. The extender and router have now successfully established a connection when the WPS LED on both devices begins to flash steadily. Additionally, connect and configure your Wavlink AC1200 extender in the area where you wish to experience high-speed internet access.  As a result, the Wavlink AC1200 extender configuration procedure is…

Encountering issues in accessing the Netgear Orbi Login page? This is a common issue that several users face. The problem usually happens due to the failure in proper connection of the device to the router network or due to the wrong IP address of the Orbi router. Luckily, the problem is easily solvable. To begin with, make sure your device is linked to the Orbi network and check your internet connection. Try cleaning the cache on your browser or using a different one if the issue still exists. Alternatively, you can use orbilogin.com or manually enter the default IP address (192.168.1.1) to…